How To Access Wireless Camera From Internet
How to view your IP camera remotely via a spider web browser
This Article Applies to:
Note: The steps below assume y'all already have your IP camera installed and continued to a router with Net admission. HTTP://192.168.1.101 represents the IP address of the photographic camera being accessed.
Step ane
Find your camera's IP address. If yous don't know its IP address, click here.
Step ii
Open a spider web browser and type the IP address. Enter your login information.
Step 3
Go to SETTING > BASIC > Network > Information to notice the HTTP port number used by the photographic camera. The default is 80.
Usually in that location is no demand to change the port number. However some ISPs block port 80, so you may need to change the port number appropriately. In the image below, we changed it to 3333.
Step four
After you change the port, yous will demand to reboot the photographic camera in order to relieve the changes. Y'all can practise that by going to SETTING > BASIC > Organisation > Initialize and clicking Reboot.
Pace 5
Later you reboot, log back into the photographic camera on your web browser, using
http://(IP accost):(Camera port number).
For this example, the address would be http://192.168.i.101:3333.
Afterward this, y'all'll need to adapt the port forwarding settings on your router. The configuration depends on the router model. Consult your router's technical back up accordingly. For this case, we are using a TP-Link TL-WR941ND.
Step 1
Log into your router's management page (http://world wide web.tp-link.u.s./faq-87.html).
Go to Forwarding > Virtual Servers and click Add New.
Step 2
Type the IP address and the port used by the photographic camera in the corresponding field. For the Protocol, we recommend you select ALL. Click Relieve to add this new entry.
Step 3
Port 3333 can at present be used past the camera.
Step 4
Become to Status page to bank check the WAN IP accost of the router.
Step v
On a different PC (one that'due south not connected to the same network equally your camera), you lot can view your camera by opening the web browser, typing http://(IP accost):(Camera port number) and pressing Enter.
For this instance, the address would be http://183.38.vii.205:3333.
Is this faq useful?
Your feedback helps improve this site.
Subscribe TP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link'due south Privacy Policy.
Be The First To Go Exclusive Deals & News
From Singapore?
Get products, events and services for your region.
Source: https://www.tp-link.com/us/support/faq/304/
Posted by: anthonyseellive.blogspot.com
0 Response to "How To Access Wireless Camera From Internet"
Post a Comment