How To Hook Up A Hikvision Ptz Camera

How-To

Using the latest firmware release, DS-K1T671TM-3XF can send email notifications direct from the final, eliminating the dependency on client software for such feature. This document will guide through the necessary pre-requisites and procedures required to setup email notifications on DS-K1T671TM-3XF.

Cognition Base Link:Electronic mail Setup on DS-K1T671TM-3XF

View the most updated version of this document here:
Thousand-Series DVR upgrade instruction
The Turbo 4 Hybrid DVR M series has multiple models and across dissimilar platform and chipset. It also has similar firmware development of other recording product line; DVR K series has too introduced the GUI4.0 to ensure the serial to exist compatible to the newest technology available. The new database compages is besides brought into the DVR firmware v4.0 to be futurity proof and for improve recording search feel.

Database Optimization and Repair

Equally more affordable cameras introduced over fourth dimension with greater video resolution and data sizes, more than efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in guild to exist futureproof.
Afterwards upgrading to v4.X, the recorder database will need to be converted and optimize. If you are experiencing issues, where playback is expected but non found, delight make sure to perform "Database Rebuild" equally indicated in the procedures and scenarios below.

Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive.

Action after firmware upgraded

ane. Upgrade the DVR according to the chart above.

2. Reconfirming Channel'southward Recording Schedule

- Confirm channel'south recording schedule is enable.

- Check if the channel is on correct recording schedule.

3. Double Check Storage Setting

- Make certain all channel are assigned to record on its HDD group when the Storage setting is under Grouping Mode.

four. Perform Database Rebuild locally.

• Some version above back up Database Rebuild via web access - K51 and K72

• Perform Database Rebuild regardless if system is having whatsoever database result symptom.

• Database Rebuild procedure is average ~30 to 60min per TB. The procedure may notwithstanding varies depends recording information.

• Later on Database Rebuild - Check log to confirm Database Rebuild has went thru properly.

• If Database Rebuild Started and Stopped log has been log merely within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild once more.

• To check log > Arrangement > Log > Data > Database Rebuild Started and Stopped.

• If the log option is not available - access system via SSH can also obtain like result.

v. Recording Information is still missing afterwards database rebuild process.

If the data has not been recorded or has been overwritten, Database rebuild process is not able think those lost data. Have the system upgraded to the latest available firmware version higher up to prevent any future data lost is strongly recommended for all application.

Source: https://us.hikvision.com/en/support-resources/documentation/how-to

Posted by: anthonyseellive.blogspot.com